- Multiple simultaneous conversions enable large-scale virtualization implementations.- Quiescing and snapshotting of the guest operating system on the source machine before migrating the data ensures conversion reliability.- Hot cloning makes conversions non-disruptive, with no source server downtime or reboot.- Sector-based copying enhances cloning and conversion speed.
StarWind V2V Converter / P2V Migrator is a free software for cloning and transforming VMs from one format to another, as well as converting physical machines into virtual ones. It is utilized when migration or Hypervisor Switch is required. Compared to the typical converters built into hypervisors, StarWind V2V Converter / P2V Migrator offers bi-directional conversion between all the major VM formats: VMDK, VHD/VHDX (Windows Repair Mode aware), QCOW2, and StarWind native IMG.
p2v microsoft virtual machine converter download free
StarWind V2V Converter enables the conversion of a physical machine into a virtual one that resides on a Hyper-V, ESXi, Xen Project, or another industry-standard hypervisor server. It allows converting physical disks or volumes into a variety of formats: VHD/VHDX, VMDK, QCOW, and IMG/RAW. Simply start StarWind V2V Converter on a physical machine and convert it into a virtual one located on a remote server. Data consistency is preserved throughout the migration.
StarWind V2V Converter / P2V Migrator alleviates the risk of data corruption during conversion by working with a copy of the target VM, keeping the original file intact. The utility uses VSS snapshots while carrying out P2V migration. In this way, the machine state is consistent, and any chance of data corruption or loss is avoided. StarWind can also replicate the virtual drives across multiple nodes in the cluster to ensure constant uptime of your data using StarWind VSAN.
StarWind V2V Converter / P2V Migrator is free software, without any hidden payments, additional required licenses, or timebombs. In other words, there are no strings attached, V2V Converter / P2V Migrator is best-qualified for immediate download and use.
I got this:There are blocking issues for the physical-to-virtual conversion: There is no BCD boot device found in the source machine, noticing that conversion of an EFI boot machine is currently not supported
Microsoft Virtual Machine Converter (MVMC) is a Microsoft-supported, stand-alone solution for the IT pro or solution provider who wants to convert virtual machines and disks from VMware hosts to Hyper-V hosts and Windows Azure or alternatively convert a physical computer running Windows Server 2008 or above server operating systems or Windows Vista or above client operating systems to a virtual machine running on Hyper-V host.
MVMC can be deployed with minimal dependencies. Because MVMC provides native support for Windows PowerShell, it enables scripting and integration with data center automation workflows such as those authored and run within Microsoft System Center 2012 Orchestrator R2. It can also be invoked through the Windows PowerShell command-line interface. The solution is simple to download, install, and use. In addition to the Windows PowerShell capability, MVMC provides a wizard-driven GUI to facilitate virtual machine conversion.
The 3.0 release of MVMC adds the ability to convert a physical computer running Windows Server 2008 or above server operating systems or Windows Vista or above client operating systems to a virtual machine running on Hyper-V host.
NOTE: Choose your VM generation carefully. Starting with Windows 2012 R2, Hyper-V has a new option: Generation 2 virtual machine. This is a second generation firmware for VMs with a revised set of virtual hardware and new opportunities for users, such as a boot from an SCSI device. There will be more to come on this topic in future releases. Among noticeable limitations of Generation 2 VMs, is that there is no support for a guest OS older than Windows 8, not to mention Unix-like. Practically speaking, choose this only for Windows 8/8.1 or Windows Server 2012/2012 R2 and only for 64-bit builds.
Pre-install Hyper-V Integration Services. Hyper-V Integration Services is a set of drivers and applications used for proper work of VMs. Install Integration Services on the OS before performing P2V migration. If it is not possible to install Integrated Services on a physical machine, convert a physical machine to a virtual machine. If your VM cannot load, power off the VM, mount your VHD (VHDX) virtual disk to your Windows system, and use PowerShell to install Integration Services into a mounted VHD (VHDX).
MVMC (Microsoft Virtual Machine Converter) is developed by Microsoft and used to convert the entire physical machine or VMware virtual machine including all disks to a Hyper-V VM. Be aware that MVMC converts each partition to a single virtual disk. If the hard disk drive of a physical server has 4 partitions, then MVMC will create 4 separate virtual disk files of a VHD format (converting to VHDX files is not supported). Hence, the hidden 100MB or 350MB partitions that are automatically created during installation of new Windows versions (Windows 7 or later) will be converted as separate virtual disks.
Disk2VHD is a free conversion tool developed by Sysinternals that was acquired by Microsoft. This tool can convert physical disks to virtual disks, but cannot convert the entire virtual machine. Notice that the OS running on a physical server may not be prepared for running in virtual environment by Disk2VHD before converting disks. If a physical disk consists of multiple partitions, these partitions will be created on a single dynamic VHD or VHDX virtual disk (unlike partitions converted by MVMC). You can select particular disk partitions for conversion. A target virtual disk file must not be located on the volume that is converted. Disk volumes encrypted by Bitlocker cannot be converted.
Download the virtual machine converter from the Microsoft site and install the application. Installation is straightforward and was explained previously in the blog post focused on converting VMware VMs to Hyper-V VMs. Make sure that the BITS Compact Server is installed on a Hyper-V host that is a destination server.
Select a Hyper-V host as the destination for the virtual machine. Notice that you cannot select a host as the destination server if a Hyper-V role is not enabled on that server. You can enter localhost as the destination server address if you select a Hyper-V host as the destination server. If you use a broker, then enter the name or the IP address of the destination Hyper-V server instead of localhost. Enter the credentials of an administrative account in order to access a Hyper-V server, or check the box Use my Windows user account if your account has adequate privileges and MVMC is running on a destination Hyper-V host. Click Next to continue.
Select a temporary location on the machine where the virtual machine converter is running, for example E:\virtual. If you run MVMC on the destination Hyper-V host, you can use the same directory as you have specified in the previous step for storing virtual disk files. After finishing the conversion, these temporary files will be deleted.
Using Microsoft Virtual Machine Converter for converting physical machines is a good idea if the requirements are met and the OS on the source machine is in the list of supported operating systems. Configuring MVMC is not difficult, but is susceptible to errors. Only the VHD format of virtual disks is supported. One virtual disk file is created for each volume of the source physical disk; a temporary directory with an amount of free space equal to the used space on source disks is required for conversion. Despite the limitations, you have a virtual machine that is ready to work as a result.
Disk2VHD has a simpler interface with a lower number of options but you can use this tool for converting physical disks with operating systems that are not supported by MVMC. Disk2VHD supports the VHDX format of virtual disks while MVMC does not. You have to manually create a new VM and connect the virtual disks created after conversion to a virtual machine.
The V2V Converter utility allows copying a virtual machine from one hypervisor to another one with a parallel conversion of virtual disks. The conversion of a virtual machine is made by creating a new virtual machine with similar parameters.
When creating a copy of a machine, the main parameters are taken into account: number of processor cores, amount of RAM, number of network cards and monitors, disk controllers and number of disks of the machine. The machine's virtual disks are in turn copied to the specified hypervisor and connected to the new virtual machine. All network cards are connected to the virtual network that the user specifies when converting (by default, the first one in the list).
Microsoft Virtual Machine Converter (MVMC) converts virtual machines (VMs) and disks in VMware hosts to VMs that can run on Microsoft Hyper-V hosts or Microsoft Azure. The utility is also used for converting server machines running Windows Server 2008 and above and client computers running Windows Vista and above to Hyper-V VMs. Retired in 2017, MVMC has since been superseded by System Center Virtual Machine Manager (SCVMM).
Parallels RAS uses linked clones to replicate a virtual disk from an existing VM instead of creating another new VM. Thus, multiple virtual machines can share the same software installation. This helps organizations lower deployment costs significantly, also saving precious disk space and time.
Microsoft announced the release of the second version of their VMware-to-Microsoft virtualization conversion tool, the Microsoft Virtual Machine Converter (MVMC) 2.0 (download at the link). The announcement was on the Server and Cloud blog, so a little bit of marketing was thrown into the mix. Microsoft wants you to know that small, medium, and large enterprises are making the jump from vSphere (and management stack) to Hyper-V (and System Center). 2ff7e9595c
Comments